Which tools are needed for my device?
From TIAO's Wiki
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com
What tools do I need?
Don't know what tools are needed for your testing work? We have compiled the following table for you. You should be able to find out the tools needed for your job.
Original (Phat)
The following table contains the tools needed for original (phat) drives:
| # | Brand | Model | Firmware Version | Unlock Method | Power the Drive | SATA Access | Key Extraction | Key Extraction Bundle | JTAG/NAND Flasher |
|---|---|---|---|---|---|---|---|---|---|
| 1. | Samsung | (TS-H943) MS25/MS28 | Stock Firmware | Unlock not needed | DIYGADGET Connectivity Kit V3 | VT6421A PCI-SATA or VT6421 PCMCIA to SATA | Probe not needed | Probe not needed | Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon |
| 2. | Xtreme 3.3 to iXtreme 1.4 | Activate.iso | |||||||
| 3. | iXtreme 1.5 to 1.61 | Unlock via DIYGADGET Connectivity Kit V3 (tray half open method) | |||||||
| 4. | iXtreme LT | Unlock not needed | |||||||
| 5. | Bad flash or above methods do not work | Unlock using DIYGADGET PMT Tool | |||||||
| 6. | Hitachi | Pre V78, V78 and V79 | Stock firmware or non-stock firmware | Soft mode-b via JF | DIYGADGET Connectivity Kit V3 | VT6421A PCI-SATA or VT6421 PCMCIA to SATA | Probe not needed | Probe not needed | Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon |
| 7. | Benq | Stock, iXtreme 1.1 to 1.41, Xtreme/iXtreme LT | Benq unlock via JF | DIYGADGET Connectivity Kit V3 | VT6421A PCI-SATA or VT6421 PCMCIA to SATA | Probe not needed | Probe not needed | Parallel JTAG, USB NAND Flasher or USB NAND Flasher with solderless addon | |
| 8. | iXtreme 1.5 to 1.61 | Unlock via DIYGADGET Connectivity Kit V3 (tray half open method) | |||||||
| 9. | Liteon | PLDS DG-16D2S | Stock 74850C | Not needed | DIYGADGET Connectivity Kit V3 | VT6421A PCI-SATA or VT6421 PCMCIA to SATA | DIYGADGET USB Probe or Serial Probe | DIYGADGET CK3 + USB Bundle or CK3+Serial Probe Bundle | |
| 10. | Stock 83850C v1 | Not needed | via SATA | ||||||
| 11. | Stock 83850C V2 or Stock 93450C or 83850C V2 and 93450C with iX LT or 74850C, 83850C V1 with ix LT | DIYGADGET Solderless MRA tool or DIYGADGET LT Switch | Probe not needed | DIYGADGET Solderless MRA Kit or DIYGADGET LT Switch Kit | |||||
| 12. | 83850C V2, 93450C with ix1.61 or 74850C, 83850C V1 with Pre-iX LT, | Not needed | Probe not needed |
Buy Game Console Adapters from http://www.easymg.com or http://www.diygadget.com
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
