Mistake in the xbox jtag guide.

This site is best viewed in a modern browser with JavaScript enabled.

Mistake in the xbox jtag guide.

elior77

It should be J1D2 pin 6 not 5 !

TheTwo

Thanks, we have just corrected.
thanks!

eknsi

okay so does this effect the reading of the nand or writing of the nand in anyway? because i used this tutorial when i had my serial or printer port jtag kit i bought from you guys and i kept getting a E79 error when writing xell.bin so i would write the original back.
So did this error on the tutorial mess with the reading of the nand or writing and since i wrote the original back to the xbox could it have damaged the original?
When i flashed the xenon back to original it boots up perfect

classicacc

Yea I also read got identical copies and wrote with the wiring described in the tutorial and when I check my nandbackup in Infectus (nand checker) it says:
Data: 512
Spare: 16
Pages: 32
Blocks 1024
Position: 5
Total Size: 17301504
Total Pages: 32768
Bad Pages: 0
Empty Pages 1547
When I try to flash Xell I get E79 and when I flash the original Nand It boots to dashboard, but the green light in the middle keeps blinking. When I change the wiring to what you guys said in this post I get the "could not detect a flash controller!" I get this with two boards the are both xenons version 1902 and 1903.

carniver

This mistake doesn't change the wire arrangement, just a typo kind of thing. If you're getting E79 after flashing Xell/XBR then either your SMC connections are not done correctly, or your CB is greater than or equal to 6750 and the vulnerability is patched by MS.
Definitely check if connection to DB1F1 is secure, since that tiny test point is very hard to solder onto.

eknsi

Ok so i redid all connectons and still got e79 error, BUT i decided to do another xbox i had that hasnt been touch at all and followed a different tutorial and it ran perfect with no errors, but now when i try the old xbox i still get e79 error...
Now explain why this happens?

carniver

Is your CB version >6723?

eknsi

No its 1888 xenon, i have one console tht doesnt want to work that i used the lpt jtag kit and usd the messed up wiring.