gera7im
Good afternoon.
Black Flash USB+. Used JTAG mode. I tried to use different versions zhtag ( 1.0, 1.8 ) and
different firmware versions 7.02, 7.04 and 7.05.
Attempts to use the LPT channel. Set I/O speed? For TUMPA - to this speed can be varied.
It seems not determined by the device or port settings wrong?
The computer system installed Win 7 32bit, Microsoft .NET Framework 4.
With all respect,
Andrei
gera7im
Thanks for the quick response.
I will try.
gera7im
Hello.
1) Completely removed from the driver on your computer programmer.
2) Newly, according to the instructions, set on PL2303_Prolific_DriverInstaller_v1.8.0.zip (File on the server is not) and ATmega 32U2 DFU.
3) Uploaded BCUSB.7.05.EJTAG_32K.hex
4) Since support is needed AU1320 using EJTAG Debrick Utility v1.8 RC3
5) There is a search for the programmer by LPT port.
What needs to change in the configuration or settings?
Thank you .
TheOne
Hi, sorry which chip you want to jtag with? You cannot use any LPT based jtag software on the blackflash. Blackflash is USB based.
gera7im
This is the first problem.TIAO_Black_Flash_USB+ is just a usb interface(ONLY).
The command is written correctly, and the device search is on another port (LPT).
I tried to use the command line:
C:\>zjtag -probeonly /cable:2
The result does not change ...
How to set the default port USB?
Thank you .
TheOne
so you sure zjtag will work on your device? zjtag does not work with Black Flash USB+.
you need the parallel jtag adapter ( assume your computer has physical lpt port)