[deleted]
I just received my FlashCat USB.
When I tried to load AVR Firmware, this happens:
"Error: AVR Flash Write Failed"
Console Log:
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
SPI database loaded: 159 devices supported
Welcome to FlashcatUSB interfacing software, build: 345
Running on: Microsoft Windows 7 Ultimate (32 bit)
Device connected in DFU bootloader mode
Sending AVR DFU erase command
AVR DFU command successful
Beginning AVR flash write (25682 bytes)
AVR DFU Error
State: Device is running its normal application
Status: No error condition is present
Error: AVR flash write failed
Please help. Thanks in advance.
[deleted]
UPDATE: I flipped switches in different positions and reset the device. Its finally working!!!
This device is getting troublesome. I've been on it for almost a day now. Today morning it suddenly decided to work and I was able to flash 32K hex dump of EJTAG. When I was trying to connect to SB5101i over JTAG (i didn't solder those pin headers to the surfboard) it kept showing error condition and couldn't detect the modem. So I decided to flash the AVR fimware again and the same old error is back in its glory.
Please help me.
Please find attached a GIF of the issue.
[deleted]
Hello,
Could you please try different versions of FlashcatUSB and USB-firmware