anthony281
Hi,
The smart sprinkler is not triggering my sprinkler valves. I have successfully installed the TIAO smart sprinkler software for my raspberry pi. I can access ip address 192.168.1.70 and can log into the sprinkler without any problem. I started the troubleshooting by going into the sprinkler status and turning on 1 station at a time, with a multimeter, I measured every pin-out to see if any station is on, but none. Please help.
Hardware:
1. TIAO Smart Sprinkler P1 v1.0
2. Raspberry Pi Model B+ (B PLUS) 512MB
Software:
1. Current version: 1.0.0 Alpha (Oct 5, 2014)
2. Latest version: 1.0.0 Alpha (Oct 5, 2014)
Update 12/04/2014:
I ran the "Home » Driver Downloads » Home Category » TIAO Sprinkler Controller Software » TIAO Sprinkler Pi Test Program" and confirmed that all 16 stations have output voltage. But the TIAO Smart Sprinkler software is still not working.... Any tips on making this software to work with my setup would be greatly appreciate.
[deleted]
Hi,
I had the exact same problem, luckily I had a raspberry pi A+ lying around and for some reason that worked???
I know it makes no sense because the first 24 giop pins are identical.
Let me know if it solves your problem.
Cheers