Hi
the zjtag have this problem
C:\jtag>zjtag.exe -probeonly /cable:3 /L1:3
==============================================
zJTAG EJTAG Debrick Utility v1.8 RC3
==============================================
cableid=3, cabletype=0
Dev 0:
Flags=0x0
Type=0x8
ID=0x4038a99
LocId=0x11
SerialNumber=TITL0678
Description=USB Multi-Protocol Adapter Lite
ftHandle=0x0
Set I/O speed to 7500 KHz
USB TAP device has been initialized. Please confirm VREF signal connected!
Press any key to continue... ONCE target board is powered on!
Detected IR chain length = 32
There are 31 device(s) in the JTAG chain
IDCODE for device 1 is 0x80000000 (IR length:32)
IDCODE for device 2 is 0x80000000 (IR length:0)
IDCODE for device 3 is 0x80000000 (IR length:0)
IDCODE for device 4 is 0x80000000 (IR length:0)
IDCODE for device 5 is 0x80000000 (IR length:0)
IDCODE for device 6 is 0x80000000 (IR length:0)
IDCODE for device 7 is 0x80000000 (IR length:0)
IDCODE for device 8 is 0x80000000 (IR length:0)
IDCODE for device 9 is 0x80000000 (IR length:0)
IDCODE for device 10 is 0x80000000 (IR length:0)
IDCODE for device 11 is 0x80000000 (IR length:0)
IDCODE for device 12 is 0x80000000 (IR length:0)
IDCODE for device 13 is 0x80000000 (IR length:0)
IDCODE for device 14 is 0x80000000 (IR length:0)
IDCODE for device 15 is 0x80000000 (IR length:0)
IDCODE for device 16 is 0x80000000 (IR length:0)
IDCODE for device 17 is 0x80000000 (IR length:0)
IDCODE for device 18 is 0x80000000 (IR length:0)
IDCODE for device 19 is 0x80000000 (IR length:0)
IDCODE for device 20 is 0x80000000 (IR length:0)
IDCODE for device 21 is 0x80000000 (IR length:0)
IDCODE for device 22 is 0x80000000 (IR length:0)
IDCODE for device 23 is 0x80000000 (IR length:0)
IDCODE for device 24 is 0x80000000 (IR length:0)
IDCODE for device 25 is 0x80000000 (IR length:0)
IDCODE for device 26 is 0x80000000 (IR length:0)
IDCODE for device 27 is 0x80000000 (IR length:0)
IDCODE for device 28 is 0x80000000 (IR length:0)
IDCODE for device 29 is 0x80000000 (IR length:0)
IDCODE for device 30 is 0x80000000 (IR length:0)
IDCODE for device 31 is 0x80000000 (IR length:0)
Probing bus ... Done
Defined IR Length is 5 bits
CPU assumed running under LITTLE endian
CPU Chip ID: 10000000000000000000000000000000 (0x80000000)
*** Found a AMD manufactured Atheros AR531X/231X REV 08 CPU ***
- EJTAG IMPCODE ....... : 10000000000000000000000000000000 (0x80000000)
- EJTAG Version ....... : Unknown (4 is a reserved value)
- EJTAG DMA Support ... : Yes
- EJTAG Implementation flags: R4k MIPS32
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Halting Processor ... <Processor did NOT enter Debug Mode!> ... Done
Clearing Watchdog ... Done
Loading CPU Configuration Code ... Skipped
Probing Flash at Address: 0x1FC00000 ...
Detected Chip ID (VenID
evID = 0000 : 8000)
*** Unknown or NO Flash Chip Detected ***
*** REQUESTED OPERATION IS COMPLETE ***
in list don't have present memory mx25l6405d
Best regards
