hick23
Hello, I'm using the CK4 purchased from diygadgets to replace a dvd drive. I'm able to see the drive in JF but when I have the CK4 connected via USB it does not appear as one of the come ports. I then can't use the probe to probe my liteon 78450c. When I plug in this device to the USB should I actually get a new com port - I installed the usb to serial drivers provided under downloads before plugging the device in - I'm on windows xp.
hick23
Just to reply, I did get the V4 to work. Basically, you don't need to care about the serial port and USB. What I did for a liteon was click on phatkey, then click on yes - power off the probe, put the probe on mpx102, then power on the proble and when I saw 0x52 remove it and follow the rest of the instructions. No need to use tray half open or anything like that. Also never power off the CK4 - no need to do that.
Worked great in the end.