TIAO USB SPI JTAG - Cant find "MemoryAccess" drivers in Nandpro?

This site is best viewed in a modern browser with JavaScript enabled.

TIAO USB SPI JTAG - Cant find "MemoryAccess" drivers in Nandpro?

Tag234

Hello,
I just recieved my USB SPI JTAG flasher and ive followed the setup tutorial perfectly. Sofar, ive flashed the PIC, replaced the jumper to its original position and plugged it in. Memory Access shows up but when i point it to the Nandpro 2.0e or 2.0d folder, it says it cant find a driver...
What gives? Incompatibility with 64bit Windows 7?

Tutoromix

Nandpro LibUSB driver supports 64-bit operating system.
Point to the Nandpro 2.0d extracted folder, and then point to the .INF file. Make sure there is the "custom.inf" file in your Nandpro folder. Don't point to the Nandpro 2.0e extracted folder, since it doesn't have an inf file. Drivers cannot be installed without .inf files in a directory/folder.
~~Also, make sure you rename libusb0~~_x64~~.sys/dll to just libusb0.sys/dll The custom.inf file seems to be pointing to the 32-bit driver. So we are trying to trick the installer.~~ Update: You can just download this - http://nds.cmamod.com/x360/NandPro_driver_w32_x64.zip Here is a step-by-step guide - http://www.tiaowiki.com/forums/xbox-360-hardware-talk/nandpro-2-0e-jtag-starting-checklist-(all-windows)/

nickw14

I'm using a Windows Vista and it doesn't give me the option to point it to a specific file...

Tutoromix

http://www.tiaowiki.com/forums/xbox-360-hardware-talk/nandpro-2-0e-jtag-starting-checklist-(all-windows)/
You need to make sure you can convert the Windows XP steps and use them for Windows Vista. Use a virtual machine if you don't. Still do Step 1-8 as stated if using Windows Vista. It is possible.
You are to only point to a folder. The folder contains the inf file for the operating system to install.
I have responded here as well... http://www.tiaowiki.com/forums/xbox-360-hardware-talk/usb-spi-help/msg808/#msg808

Tony

I have an error using the files above because Windows says that I need to have an SIGNED driver to use the proram

Tutoromix

Follow this step-by-step tutorial. Make sure you have 14 files in your Nandpro directory. http://www.tiaowiki.com/forums/xbox-360-hardware-talk/nandpro-2-0e-jtag-starting-checklist-(all-windows)/
It should work on the first try if you follow my steps correctly. If it doesn't, disable driver signing in Windows XP/Vista/7.

Tony

Yea I followed that I ll just disable Driver signing and see if that works. Thanks for the quick response!

Nuxtux

looking for the drivers. Where can I get them? The links show here says "This Account Has Been Suspended" tried looking for some online and it doesn't pair well. Using windows 7 x64 Sp1

TheOne

Here you go:
http://www.max-pic.com/diy/NandPro_driver_w32_x64.zip

Nuxtux

Are these the drivers that can be used with nandpro_3.0a? I can't seem to get this working with 3.0a. I get an error of "Incompatible ARM firmware for this version of NANDpro"

TheOne

No, 3.0a is beta release, these won't work with 3.0a
thanks

Nuxtux

Are there any drivers I can use for NANDpro 3.0a that will work?

nate_drake

AFAIK Nandpro 3 does not support PIC devices