How to export gerber files from Altium Designer (formerly known as Protel) for pcb production at youpcb.com
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
Contents
What is the purpose of this tutorial?
In this tutorial, we are going to show you how to export Gerber files from Altium Designer (formerly known as Protel), so that you can send it to youpcb.com for PCB fabrication.
Softwares needed
You need winzip or winrar, you probably already have it installed. If not: winzip or winrar
Export Gerber files from Altium
Design rule check
Make sure you run design rule check (Tools->Design Rule Check...) before you generate Gerber files. DRC usually makes sure that your board doesn’t exceed the manufacturer’s production abilities.
Our PCB manufacturing capabilities are outlined at the home page of [1], please using Design Rule Wizard to modify the rules accordingly.
Make sure there are no errors. If there are errors, you need to fix them before you can continue to generate Gerber files.
Generate Gerber File
In PCB view, select File -> Fabrication Output -> Gerber files. Then in the popup dialog, select General tab, set Unit to inch and format to 2:5:
In Layers tab, select "Used On" for the Plot Layers drop down, select "All OFF" for Mirror layers. Check "include unconnected mid-layer pads", and uncheck "Mechanical layers to Add to All plot":
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
