Difference between revisions of "Xbox 360 Lite On DVD Key Dumping - TIAO's Serial Key Extractor"
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
| Line 174: | Line 174: | ||
Plug the diygadget's lite-on extractor addon to your PC or USB to COM port and also plug the USB to COM adapter to a free USB port(if needed): | Plug the diygadget's lite-on extractor addon to your PC or USB to COM port and also plug the USB to COM adapter to a free USB port(if needed): | ||
| − | [[Image:plug_rs232_adapter_db9_version_to_COM.jpg|none|thumb|Plug DB9 version addon to your native COM port]][[Image:plug_rs232_adapter_to_COM|none|thumb|Plug the non-DB9 version of the addon to your native COM port]][[Image:plug_usb_to_com_to_usb_port.jpg|none|thumb|Plug USB to COM adapter to a free USB port (if you don't have native COM port)]][[Image:plug_rs232_adapter_db9_version_to_USB2COM.jpg|none|thumb|Connect DB9 version of the addon to the USB to COM adapter (if you don't have native COM port)]][[Image:plug_rs232_adapter_to_USB2COM.jpg|none|thumb|Connect non DB9 version the addon to the USB to COM adapter (if you don't have native COM port)]] | + | [[Image:plug_rs232_adapter_db9_version_to_COM.jpg|none|thumb|Plug DB9 version addon to your native COM port]][[Image:plug_rs232_adapter_to_COM.jpg|none|thumb|Plug the non-DB9 version of the addon to your native COM port]][[Image:plug_usb_to_com_to_usb_port.jpg|none|thumb|Plug USB to COM adapter to a free USB port (if you don't have native COM port)]][[Image:plug_rs232_adapter_db9_version_to_USB2COM.jpg|none|thumb|Connect DB9 version of the addon to the USB to COM adapter (if you don't have native COM port)]][[Image:plug_rs232_adapter_to_USB2COM.jpg|none|thumb|Connect non DB9 version the addon to the USB to COM adapter (if you don't have native COM port)]] |
[[Category: How Tos]] | [[Category: How Tos]] | ||
Revision as of 22:00, 22 December 2008
Contents
Why you need to extract the key?
The newer XBOX 360 comes with lite-on DVD drive. It is impossible do dump the firmware from these lite-on DVD drives. However, a new method was developed so you can at least extract the DVD key / identification from these lite-ons. You can then use the key/identification to spoof iXtreme and flash the spoofed iXtreme to a SAMSUNG/LG/BENQ or even the original Lite-on (after Dec 24/2008).
Lite-On DG16D2S
This drive started to appear in machines manufactured after 20th April 2008 (2008-04-20).
Here is how to figure out whether you have a lite-on or not:
- Remove XBOX 360 front Faceplate
- See which colour the wires are in the hole under the DVD Tray
- Yellow wires: you have lite-on DVD drive
- White wires: you have BENQ drive
You can also search on [XBOX 360 DVD Drive Database] for more information.
How it works
Basically, you will need to perform the following steps:
- Disassemble XBOX 360 (Remove Lite-on DVD drive from XBOX 360)
- Remove Lite-on DVD back cover
- Extract DVD key and identification strings
- Prepare spoofed iXtreme firmware
- Flash the spoofed firmware to a BENQ/SAMSUNG/LG or original Lite-on
Tools required
In order to get the key and flash the DVD drive to a spoofed iXtreme firmware, you will need the following tools or components:
- Access to your PC's native SATA port, or a PCI to SATA card. A VT6421A powered PCI to SATA card works best. USB to SATA convert does NOT work.
- A XBOX DVD power adapter. Buy from [here], [here] or [here]
- A Lite-on DVD key extractor. Buy from [here] or [here]
- Xtractor reader, a software used for extracting the key, spoof the firmware and flash the DVD drive. Download from [here]
- Access to your computer's serial port. This is also refers to COM port. If your computer doesn't have serial port, you can use a USB to COM converter. Buy it from [here] or [here]. You can download the Windows driver for this USB to COM converter [here (non Vista)] and [here (Vista)]
To make your life easier, we have created a package, contains the XBOX 360 DVD power adapter, HDD adapter and lite-on DVD drive key extractor with optional USB to COM adapter [here]
OK. Let's get started!
Step 1: Disassemble XBOX 360
There are tons instructions on how to disassemble XBOX 360, you can follow these instructions:
[How to disassemble XBOX 360 case]
Step 2: Remove Lite-On DVD drive back cover
Put the DVD drive on a table, locate the seal on the side of the back cover, use a utility knife to cut the seal:
Locate the 4 screws on the DVD drive, remove these screws:
Remove the back cover and get familiar with the area we will be working on:
A closer look of the area we will be working on. We will be working on the bottom pad of R707 as shown in the picture below:
Take a look of the connectors on the DVD, later on you will need to plug the DVD power cable and SATA cable to the connectors on the Lite-on DVD drive:
Step 3: Extract DVD key and identification strings
Check list of required hardwares and softwares
Make sure you have required tools and softwares available:
In order to extract the key and identification string, you will need the following hardwares:
From left to right:
- Lite-on DVD drive (From your XBOX 360, of course!)
- XBOX 360 DVD power adapter (Buy from [diygadget.com]
- SATA cable (should come with your PCI to SATA card or Xbox 360 Connectivity Kit V2 bought from [diygadget.com]
- Lite-on DVD key extractor (Buy from [diygadget.com]
- XBOX DVD power cable. You can reuse the one from your XBOX 360.
- PCI to SATA converter (Required only if you do NOT have access to a native SATA port. Buy one with VT6421A)
- USB to COM converter (Required only if your computer does NOT have a COM port. It's accessory of this [package] from [diygadget.com])
- Xtractor Reader. Download from [here]
Install optional hardwares
You do NOT need to perform this step if you have access to native SATA port and COM port.
Install PCI to SATA converter
If your computer does not have SATA port, you will need to buy a PCI to SATA card and install it on your computer before you can extract the key and identification string.
Unplug the power of your computer, open the case, locate a free PCI bank:
Insert the PCI to SATA controller card into a free PCI bank and screw it firmly:
Reattach the cover of your computer, and reconnect the power cable. Boot the machine and install the required PCI to SATA controller driver (following the instructions provided by your PCI to SATA controller card)
Install USB to Serial (COM) port driver
If you purchased a USB to COM adapter from [diygadget.com] or received it as part of your package purchased from [diygadget.com], you must install the driver BEFORE you plug the converter to your USB port. Follow the links below to download the driver:
- Win2K/XP/2003: download from [here]. As of Dec 21, the latest version of the driver is v2.0.4.102.
- Windows Vista: download from [here]
Please follow the instructions in the driver to install the software BEFORE you plug your USB to COM adapter.
After successfully installed the USB to COM driver, plug the cable to your free USB port. Your will see the following pop up message on your screen:
Now you need to found out which port is assigned to. Go your the control panel of your computer, double click on the "System" icon:
Click on the "Hardware" tab, and then click on the "Device Manager" button:
Now expend "Port (COM and LPT)", you should see something similar to the screen below. In my case, I have it assigned COM3 (or you can say port 3):
Write down the COM port number. You will need this later on.
Download required software
As I have mentioned before, you need software to extract the key and spoof the firmware. We recommend Xtractor Reader. You can download it from [here]. The file is in RAR format. You need to use WinRAR to uncompress it. Download WinRAR from [here]. This is how it looks like after you uncompress xtractor reader (I uncompressed it into C:\x360tools, you can unzipped it to a different directory if you wish):
There are also some other softwares available, such as DVDKey32 or Xecuter Ck3 Tool, but we have found that Xtractor Reader is the best one. It's fast as well. We use Xtractor Reader in this tutorial, but you can use DVDKey32 or Xecuter Ck3 Tool as well. They should work.
Connect hardwares together
In order to successfully extract the key, you need the following hardwares:
- Access to your PC's native SATA port, or a PCI to SATA card. A VT6421A powered PCI to SATA card works best. USB to SATA convert does NOT work.
- A XBOX DVD power adapter. Buy from [here], [here] or [here]
- A Lite-on DVD key extractor. Buy from [here] or [here]
- Xtractor reader, a software used for extracting the key, spoof the firmware and flash the DVD drive. Download from [here]
- Access to your computer's serial port. This is also refers to COM port. If your computer doesn't have serial port, you can use a USB to COM converter. Buy it from [here] or [here]. You can download the Windows driver for this USB to COM converter [here (non Vista)] and [here (Vista)]
In previous steps, you should have installed PCI to SATA controller card (if needed), you should have also installed the driver for USB to COM adapter as well (if needed). Now let's connect all these hardwares together.
First, you need to turn off your PC and unplug the power of the PC (physically unplug the power cord from the wall outlet). Then open the case of your PC, find one open Molex power connector. The Molex power is the standard connector which provide power to HD, DVD inside your PC. It has 4 wires, yellow, black, black and red. You cannot miss it :-)
Now, put a book on the case of the pc, and put the Lite-On DVD on the book (thus the PC case won't touch DVD):
Connect the DVD adapter to the Molex connector:
Then use the XBOX 360 DVD power cable connect the DVD power adapter:
Connect the other end of the DVD power cable to Lite-On DVD drive:
Connect the SATA cable to Lite-On DVD drive:
Connect the other end of the SATA cable to your PC's native SATA port or the PCI to SATA controller card installed in previous steps:
Plug the diygadget's lite-on extractor addon to your PC or USB to COM port and also plug the USB to COM adapter to a free USB port(if needed):
10 PCS, 10cm x 10cm, 2 layers prototype for $38.80 shipped!
