Admin: /* FT231X IO Pin Header */

2017-06-02T11:58:35Z

‎FT231X IO Pin Header

Admin: Created page with "
2017-06-02T11:57:04Z

Created page with "<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, Game Input MultipleXer or Game Input MatriX, GBoard, PCB, Prototype, Cheap, fa..."

New page
<meta name="keywords" content="TIAOWIKI,Smart sprinkler controller, raspberry pi, wifi, network, Game Input MultipleXer or Game Input MatriX, GBoard, PCB, Prototype, Cheap, fast, schematic, protel, altium, eagle, expressPCB, JTAG,TJTAG,FTA,JTAG,WRT54G,DD-WRT,debrick,tomato,router,wireless router,motorola modem,sb5100,wiggler,arm,mips,avr,buffered jtag,unbuffered jtag,10 pin,20 pin, 12 pin,xbox,xbox 360,modchip mod-chip,mod chip,liteon,lite-on,samsung,hitachi,lg,dvd rom,sata,dvd key,usb probe,cable modem, usb spear,serial spear, serial probe, extract dvd key,mod xbox 360,video games"></meta>
<meta name="description" content="TIAO GBoard GIMX Board Adapter"></meta>

== TIAO GBoard / GIMX Adapter ==

For system connection diagram as GIMX V2 adapter, please refer to [[TIAO GIMX System Connection Diagram]].
For loading the firmware, please refer to [[How to Install GIMX Firmware on TIAO GBoard/GIMX Adapter]]

The [http://www.diygadget.com/development-boards/tiao-gimx-gboard-game-input-multiplexer-matrix-usb-serial-and-atmega32u4-development-board.html TIAO GBoard / GIMX adapter] is a combined all in one board for serial and AVR development. It also provides jumper connections for easy and quick GIMX connectoion (to be used as a GIMX Game Input MultipleXer or Game Input MatriX adapter. For more information on GIMX, please check it out [http://blog.gimx.fr/ here].

The TIAO GBoard/GIMX V2 Adapter features:

* All in one board contains USB to COM adapter and ATMEVA32U4 for AVR development.
* Bootloader is installed on the ATMEGA32U4, so you don't need a programmer to load the firmware.
* Quick connection jumpers to convert the GBoard to a GIMX adapter

=== TIAO GBoard/GIMX V2 Adapter Hardware Dimensions ===

The board dimension of TSS is 59.56 x 40.26mm. It also has 4 mounting holes, the radius of the mounting hole is 2.5mm:

[[Image:Gimx2-1.png|none]]

===TIAO GBoard/GIMX V2 Adapter Connector Layouts ===

The following picture shows the connector layout of the TIAO GBoard/GIMX V2 Adapter.

[[Image:Gimx2-2.png|none]]

# [[#CP2102 IO Pin Header|CP2102 IO Pin Header]]
# [[#CP2102 USB Connector|CP2102 USB Connector]]
# [[#ATMEGA32U4 IO Pin Header 1|ATMEGA32U4 IO Pin Header 1]]
# [[#J4|GIMX RXD Enable]]
# [[#J3|GIMX TXD Enable]]
# [[#ATMEGA32U4 Bootloader Pin|ATMEGA32U4 Bootloader Pin]]
# [[#ATMEGA32U4 USB Connector|ATMEGA32U4 USB Connector]]
# [[#J5|ATMEGA32U4 Power Select]]
# [[#ATMEGA32U4 IO Pin Header 2|ATMEGA32U4 IO Pin Header 2]]

==== FT231X IO Pin Header ====

[[Image:Gimx2-3.png||None]]
{|
! align="left"|Pin #
! FT231X Pin
|-
| 1
| CTS
|-
| 2
| RTR
|-
| 3
| RXD
|-
| 4
| TXD
|-
| 5
| DSR
|-
| 6
| DTR
|-
| 7
| RI
|-
| 8
| DCD
|-
| 9
| VCP
|-
| 10
| CPVDD
|-
| 11
| GND
|-
| 12
| GND
|}

==== CP2102 USB Connector ====
[[Image:gimx-7.png||none]]

* The USB connector for CP2102.

==== ATMEGA32U4 IO Pin Header 1 ====

[[Image:gimx-8.png|none]]
{|
! align="left"|Pin #
! ATMEGA32U4 Pin
|-
| 1
| GND
|-
| 2
| +5V
|-
| 3
| RST (Low)
|-
| 4
| PE6
|-
| 5
| PB0
|-
| 6
| PB1
|-
| 7
| PB2
|-
| 8
| PB3
|-
| 9
| PB7
|-
| 10
| PD0
|-
| 11
| PD1
|-
| 12
| PD2
|-
| 13
| PD5
|-
| 14
| PD3
|-
| 15
| PC6
|-
| 16
| PC7
|}

==== J4 ====
[[Image:gimx-j4.png||none]]

* Jumper on: Enable board to be a DIY GIMX adapter (J3 has to be on as well)
* Jumper off: Enable board to be a AVR and USB to Serial development board. (J3 has to be off as well)

==== J3 ====
[[Image:gimx-j3.png||none]]

* Jumper on: Enable board to be a DIY GIMX adapter (J4 has to be on as well)
* Jumper off: Enable board to be a AVR and USB to Serial development board. (J4 has to be off as well)

==== ATMEGA32U4 Bootloader Pin ====

* ATMEGA32U4 Bootloader Pin, press and hold to enter bootloader mode.

==== ATMEGA32U4 USB Connector ====
[[Image:gimx-6.png||none]]

* The USB connector for ATMEGA32U4.

==== J5 ====
[[Image:gimx-j5.png||none]]

* Jumper on 1-2: Enable 5.0V IO on ATMEGA32U4.
* Jumper on 2-3: Enable 3.3V IO on ATMEGA32U4.

==== ATMEGA32U4 IO Pin Header 2 ====

[[Image:gimx-9.png|none]]
{|
! align="left"|Pin #
! ATMEGA32U4 Pin
|-
| 1
| GND
|-
| 2
| Vcc (5.0 or 3.3 depending on J5)
|-
| 3
| Vcc (5.0 or 3.3 depending on J5)
|-
| 4
| AREF
|-
| 5
| PF0
|-
| 6
| PF1
|-
| 7
| PF4
|-
| 8
| PF5
|-
| 9
| PF6
|-
| 10
| PF7
|-
| 11
| PB6
|-
| 12
| PB5
|-
| 13
| PB4
|-
| 14
| PD7
|-
| 15
| PD6
|-
| 16
| PD4
|}

@@ Line 40: / Line 40: @@
-==== FT231X IO Pin Header ====
+==== CP2102 IO Pin Header ====
 [[Image:Gimx2-3.png||None]]
 {|
 ! align="left"|Pin #
-! FT231X Pin
+! CP2102 Pin
 |-
 | 1